errno.h

简介:

共享错误号码

属性:

``extern int errno`` : 通用错误代码

宏定义(复制自代码,了解即可):

#define E2BIG 1            /* 参数列表过长,或者在输出buffer中缺少空间 或者参数比系统内建的最大值要大 Argument list too long.*/

#define EACCES 2           /* 访问被拒绝 Permission denied*/ 

#define EADDRINUSE 3       /* 地址正在被使用 Address in use.*/

#define EADDRNOTAVAIL 4    /* 地址不可用 Address  not available.*/

#define EAFNOSUPPORT 5     /* 地址family不支持 Address family not supported.*/

#define EAGAIN 6           /* 资源不可用,请重试。 Resource unavailable, try again (may be the same value as [EWOULDBLOCK]).*/

#define EALREADY 7         /* 连接已经在处理 Connection already in progress.*/

#define EBADF 8            /* 错误的文件描述符 Bad file descriptor.*/

#define EBADMSG 9          /* 错误的消息 Bad message.*/


#define EBUSY 10           /* 设备或资源忙 Device or resource busy.*/

#define ECANCELED 11       /* 操作被取消 Operation canceled.*/

#define ECHILD 12          /* 没有子进程 No child processes.*/

#define ECONNABORTED 13    /* 连接已断开 Connection aborted.*/

#define ECONNREFUSED 14    /* 连接被拒绝 Connection refused.*/

#define ECONNRESET 15      /* 连接被重置 Connection reset.*/

#define EDEADLK 16         /* 资源死锁将要发生 Resource deadlock would occur.*/

#define EDESTADDRREQ 17    /* 需要目标地址 Destination address required.*/

#define EDOM 18            /* 数学参数超出作用域 Mathematics argument out of domain of function.*/

#define EDQUOT 19          /* 保留使用 Reserved*/



#define EEXIST 20          /* 文件已存在 File exists.*/

#define EFAULT 21          /* 错误的地址 Bad address*/

#define EFBIG 22           /* 文件太大 File too large.*/

#define EHOSTUNREACH 23    /* 主机不可达 Host is unreachable.*/

#define EIDRM 24           /* 标志符被移除 Identifier removed.*/

#define EILSEQ 25          /* 不合法的字符序列 Illegal byte sequence.*/

#define EINPROGRESS 26     /* 操作正在处理 Operation in progress.*/

#define EINTR 27           /* 被中断的函数 Interrupted function.*/

#define EINVAL 28          /* 不可用的参数 Invalid argument.*/

#define EIO 29             /* I/O错误 I/O error.*/



#define EISCONN 30         /* 套接字已连接 Socket is connected.*/

#define EISDIR 31          /* 是一个目录 Is a directory*/

#define ELOOP 32           /* 符号链接级别过多 Too many levels of symbolic links.*/

#define EMFILE 33          /* 文件描述符的值过大 File descriptor value too large.*/

#define EMLINK 34          /* 链接数过多 Too many links.*/

#define EMSGSIZE 35        /* 消息过大 Message too large.*/

#define EMULTIHOP 36       /* 保留使用 Reserved.*/

#define ENAMETOOLONG 37    /* 文件名过长 Filename too long.*/

#define ENETDOWN 38        /* 网络已关闭 Network is down.*/

#define ENETRESET 39       /* 网络连接已断开 Connection aborted by network.*/

#define ENETUNREACH 40     /* 网络不可达 Network unreachable.*/

#define ENFILE 41          /* 系统中打开的文件过多 Too many files open in system.*/

#define ENOBUFS 42         /* 缓冲区空间不足 No buffer space available.*/

#define ENODATA 43         /* 队列头没有可读取的消息 No message is available on the STREAM head read queue.*/

#define ENODEV 44          /* 没有指定的设备 No such device.*/

#define ENOENT 45          /* 没有指定的文件或目录 No such file or directory.*/

#define ENOEXEC 46         /* 可执行文件格式错误 Executable file format error.*/

#define ENOLCK 47          /* 没有可用的锁 No locks available.*/

#define ENOLINK 48         /* 保留 Reserved.*/


#define ENOMEM 49          /* 没有足够的空间 Not enough space.*/


#define ENOMSG 50          /* 没有期待类型的消息 No message of the desired type.*/

#define ENOPROTOOPT 51     /* 协议不可用 Protocol not available.*/

#define ENOSPC 52          /* 设备上没有空间 No space left on device.*/

#define ENOSR 53           /* 没有STREAM资源  No STREAM resources.*/

#define ENOSTR 54          /* 不是STREAM Not a STREAM*/

#define ENOSYS 55          /* 功能不支持 Function not supported.*/

#define ENOTCONN 56        /* 套接字未连接 The socket is not connected.*/

#define ENOTDIR 57         /* 不是目录 Not a directory.*/

#define ENOTEMPTY 58       /* 目录非空 Directory not empty.*/

#define ENOTRECOVERABLE 59 /* 状态不可覆盖 State not recoverable.*/



#define ENOTSOCK 60        /* 不是一个套接字 Not a socket.*/

#define ENOTSUP 61         /* 不被支持 Not supported (may be the same value as [EOPNOTSUPP]).*/

#define ENOTTY 62          /* 不正确的I/O控制操作 Inappropriate I/O control operation.*/

#define ENXIO 63           /* 没有这样的设备或地址 No such device or address.*/

#define EOPNOTSUPP 64      /* 套接字不支持该操作 Operation not supported on socket (may be the same value as [ENOTSUP]).*/

#define EOVERFLOW 65       /* 数值过大,产生溢出 Value too large to be stored in data type.*/

#define EOWNERDEAD 66      /* 之前的拥有者挂了 Previous owner died.*/

#define EPERM 67           /* 操作不被允许 Operation not permitted.*/

#define EPIPE 68           /* 断开的管道 Broken pipe.*/

#define EPROTO 69          /* 协议错误 Protocol error.*/



#define EPROTONOSUPPORT 70 /* 协议不被支持 Protocol not supported.*/

#define EPROTOTYPE 71      /* 对于套接字而言,错误的协议 Protocol wrong type for socket.*/

#define ERANGE 72          /* 结果过大 Result too large.*/

#define EROFS 73           /* 只读的文件系统 Read-only file system.*/

#define ESPIPE 74          /* 错误的寻道 Invalid seek.*/

#define ESRCH 75           /* 没有这样的进程 No such process.*/

#define ESTALE 76          /* 保留 Reserved.*/

#define ETIME 77           /* 流式ioctl()超时 Stream ioctl() timeout*/

#define ETIMEDOUT 78       /* 连接超时 Connection timed out.*/

#define ETXTBSY 79         /* 文本文件忙 Text file busy.*/



#define EWOULDBLOCK 80     /* 操作将被禁止 Operation would block (may be the same value as [EAGAIN]).*/

#define EXDEV 81           /* 跨设备连接 Cross-device link.*/